PRODUCT FINDER

What We Do

Hydraulic Cable Puller (HCP) SYSTEM

Overview

The 55 ton Hydraulic Cable Puller is a liner winch that is designed to pull in or pay out 1 5/8-inch wire rope. The puller consists of two wire rope grips that can grip or release the wire rope by opening and closing the grip jaws with small hydraulic cylinders. The fixed grip is stationary on the puller frame while the hauling grip is mounted on a moving cross head.
The cross head moves back and forth in the direction of the wire rope by the action of large hydraulic cylinders. Movement of the cross head is coordinated with the gripping and releasing of the wire rope pull in or pay out the wire rope.

Benefits

Fewer are needed to operate the puller than purchase systems.
The puller controls can be located wherever advantageous.
Bell Control Module.
Continuous line pull gives positive control of the pulling operation. No holding stoppers are required for the purchase wires when heaving is stopped because the ground leg is held by grips integral to the pullers. Pulling can be resumed immediately.
The Pullers are portable.
No loss of pulling force caused by the sheaves with the loss of efficiency.
The heaving operation can be proceeding continuously without stopping to fleet out the purchases.

Specification

Model No. : WJ-HCP-55T
Capacity : SWL 55 tons
Wire Rope : 1-5/8 inch
Pulling Speed : 2m/min
Hyd. Pressure : 210 bar

Patent

Hydraulic Cable Puller For Salvage
(Application No. 20-2010-0005153)
Localization development
applied to ROKN ATS-II (H.7038)
Carpenter Stopper For Wire Rope
(Application No. 20-2010-0007823)
Localization development
applied to ROKN ATS-II (H.7038)

Components

HPU

DISEL DRIVEN HPU

Engine : 120HP, 2000 RPM
Fuel : Diesel
Fan Radiator Type
Pump Type : Plunger
Flow : 100 Liter
Weight : 2.0 Tons

Load Cell

Hydraulic

Capacity : 55 ton(Max.80ton)
Size(LWH) : 685x440x375
Performance Test : Tensile Test

Electric

Capacity : 55 ton(Max.80ton)
Size(LWH) : 510x160x106
Performance Test : Tensile Test

Hose Reel

Hose Range : HCP↔V/V, Block ↔ HPU
Hose Length : ½” x 15m, 1” x 15m
Size(LxWxH) : 850x700x860(For E) 850x1000x860(For D)
Operating : By Manual

Record

ROKN, ATS-II(1,2)

Hyd. Cable Puller System

The HCP system is designed to pull in or pay out 1-5/8 inch diameter wire rope at tensions up to 55ton. It is also designed to be rugged and capable of withstanding the force and conditions found in salvage scenarios.