PRODUCT FINDER
Towing Roller & Norman Pin
Overview
Towing Roller & Norman Pin
The tow pin assembly is designed to trap and hold a tow wire by raising a combination of pins and holding down blocks. The assembly is designed for the breaking strength of the wire rope towing hawser. The housings are faired, particularly at the corners such that the tow hawsers will not foul on the housing.
Specification
- Retractable Pin
- Free Wheel Type Roller
- Towing Pin (Safety Working Load) : 78 Tons
- Towing Roller (Safety Working Load) : 42 Tons
- MIL-HDBK-2036, MIL-STD-810G
- MIL-STD-882
- MIL-STD-1399 SEC
- Elec. & Hyd. Type
Component
- Towing Pin 4 set (SWL) : 78 Ton
- Hold Down Block 3set
- Towing Roller 1set (SWL) : 42 ton
- Norman Pin 2set (SWL) : 50 ton
- Hydraulic Valve Block 3set
- Hydraulic Manifold Block 1set
- Control Panel 2set (220V 1Ph 60Hz)
Patent
- Patent No.10-1466972
Record
- ROKN, ATS-II(1,2)
Towing Roller & Norman Pin (WJ-T/R-78T)
The major assemblies of the tow pin assembly are the tow pins, the stern roller, and the hold down blocks.